| Product Type | Model | Range | Minor Divisions | Description |
| Differential Pressure Gage | 2000-0 | 0-0.50″ w.c. | 0.01 | Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position. |
| Differential Pressure Gage | 2000-00 | 0-0.25″ w.c. | 0.005 | Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position. |
| Differential Pressure Gage | 2000-00N | .05-0-.2″ w.c. | 0.005 | Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position. |
| Differential Pressure Gage | 2001 | 0-1.0″ w.c. | 0.02 | Differential pressure gage, range 0-1.0″ w.c., minor divisions .02. |
| Differential Pressure Gage | 2002 | 0-2.0″ w.c. | 0.05 | Differential pressure gage, range 0-2.0″ w.c., minor divisions .05. |
| Differential Pressure Gage | 2003 | 0-3.0″ w.c. | 0.10 | Differential pressure gage, range 0-3.0″ w.c., minor divisions .10. |
| Differential Pressure Gage | 2004 | 0-4.0″ w.c. | 0.10 | Differential pressure gage, range 0-4.0″ w.c., minor divisions .10. |
| Differential Pressure Gage | 2005 | 0-5.0″ w.c. | 0.10 | Differential pressure gage, range 0-5.0″ w.c., minor divisions .10. |
| Differential Pressure Gage | 2006 | 0-6.0″ w.c. | 0.20 | Differential pressure gage, range 0-6.0″ w.c., minor divisions .20. |
| Differential Pressure Gage | 2008 | 0-8.0″ w.c. | 0.20 | Differential pressure gage, range 0-8.0″ w.c., minor divisions .20. |
| Differential Pressure Gage | 2010 | 0-10″ w.c. | 0.20 | Differential pressure gage, range 0-10″ w.c., minor divisions .20. |
| Differential Pressure Gage | 2015 | 0-15″ w.c. | 0.50 | Differential pressure gage, range 0-15″ w.c., minor divisions .50. |
| Differential Pressure Gage | 2020 | 0-20″ w.c. | 0.50 | Differential pressure gage, range 0-20″ w.c., minor divisions .50. |
| Differential Pressure Gage | 2025 | 0-25″ w.c. | 0.50 | Differential pressure gage, range 0-25″ w.c., minor divisions .50. |
| Differential Pressure Gage | 2030 | 0-30″ w.c. | 1.0 | Differential pressure gage, range 0-30″ w.c., minor divisions 1.0. |
| Differential Pressure Gage | 2040 | 0-40″ w.c. | 1.0 | Differential pressure gage, range 0-40″ w.c., minor divisions 1.0. |
| Differential Pressure Gage | 2050 | 0-50″ w.c. | 1.0 | Differential pressure gage, range 0-50″ w.c., minor divisions 1.0. |
| Differential Pressure Gage | 2060 | 0-60″ w.c. | 2.0 | Differential pressure gage, range 0-60″ w.c., minor divisions 2.0. |
| Differential Pressure Gage | 2080 | 0-80″ w.c. | 2.0 | Differential pressure gage, range 0-80″ w.c., minor divisions 2.0. |
| Differential Pressure Gage | 2100 | 0-100″ w.c. | 2.0 | Differential pressure gage, range 0-100″ w.c., minor divisions 2.0. |
| Differential Pressure Gage | 2150 | 0-150″ w.c. | 5.0 | Differential pressure gage, range 0-150″ w.c., minor divisions 5.0. |
Series 2000 Magnehelic® Differential Pressure Gage (Inches of Water)
USD $71.00
Indicate Positive, Negative or Differential, Accurate within 2%
Variation Info
Additional information
| Weight | 0.51 kg |
|---|---|
| Model | 2000-0, 2000-00, 2000-00N, 2001, 2002, 2003, 2004, 2005, 2006, 2008, 2010, 2015, 2020, 2025, 2030, 2040, 2050, 2060, 2080, 2100, 2150 |
Specifications
Specifications
| Service: | Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. |
| Wetted Materials: | Consult factory. |
| Housing: | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. |
| Accuracy: | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C). |
| Pressure Limits: | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar). |
| Enclosure Rating: | IP67. |
| Overpressure: | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page. |
| Temperature Limits: | 20 to 140°F* (-6.67 to 60°C). -20°F (-28°C) with low temperature option. |
| Size: | 4″ (101.6 mm) diameter dial face. |
| Mounting Orientation: | Diaphragm in vertical position. Consult factory for other position orientations. |
| Process Connections: | 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back. |
| Weight: | 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g). |
| Standard Accessories: | Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.) |
| Agency Approval: | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II). Note: -SP models not RoHS approved. |
| Note: For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Options Page. | |
| *Low temperature models available as special options | |
Catalog Page
Catalog Page
Accessories
Accessories
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.